Joes Rear Trailing Arm Bracket
JOES superior design allows you to get your mount closer to the tire for maximum control.
- Designed for 3″ diameter axle tubes
- Axle centerline to shock mount measures 6⅝” vertically
- Trailing arm mounting hole centerline to edge of shock mount spacer is 4¼”
- Shock stud is threaded in to a press fit steel boss
- Shock stud is ½” diameter
- Caps must be torqued to 80 ft lbs.
Internal Reference:
JOE-11402
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.