Skip to Content

Pre-Setup Safety Protocols

Shop Safety Requirements

Personal Protective Equipment (PPE)

  • Safety glasses (required at all times)
  • Closed-toe shoes with good grip
  • Work gloves when handling components
  • Back support belt when lifting heavy components

Shop Environment

  • Adequate lighting for precise measurements
  • Clean, level floor surface
  • Proper ventilation when working with fuels and lubricants
  • Fire extinguisher readily accessible
  • First aid kit available

Equipment Safety

Scale Safety

  • Verify scale capacity before placing car
  • Ensure scales are level and calibrated
  • Check for debris that could affect readings
  • Never exceed manufacturer's weight limits

Jack Safety

  • Use jack stands - never work under a car supported only by jacks
  • Inspect jack stands for damage before use
  • Position jack stands on solid mounting points
  • Never rush when raising or lowering the car

Fuel Handling

  • No smoking or open flames in work area
  • Proper fuel storage containers only
  • Spill cleanup materials readily available
  • Understand methanol safety properties (invisible flame, toxic vapors)

Component Handling

Heavy Components

  • Get help when removing or installing heavy parts
  • Use proper lifting techniques
  • Secure loose parts to prevent falling
  • Clean hands and tools to prevent slipping

  • Fuel requirements (20 gallons for 32-gal cell, 10 gallons for 22-gal cell)
  • Scale tire installation and consistency
  • Stagger specifications (1" front, 1.5" rear)
  • Component inspection checklist
Rating
0 0

There are no comments for now.

to be the first to leave a comment.